NEC NEAX 2000 Programming Manual page 954

(1/1)
GENERAL DESCRIPTION
During an external call, a switch hook flash signal can be sent from the Attendant to allow access to
service features at the distant PABX.
STATION APPLICATION
DESK CONSOLE
SMART CONSOLE
OPERATING PROCEDURE
1. Depress the FLASH OVER TRUNK (FOT) key.
2. Dial the required feature access code.
SERVICE CONDITIONS
1. This feature is assigned on a per trunk route basis.
2. The width of the transmitted PB signal can be selected per trunk route as one of:
a. fixed at 64 msec.
b. fixed at 128 msec.
3. The duration of the hook flash signal can be assigned by system data from 64 msec. to 1920 msec. with
64 msec. increment.
Page 172
Revision 1.0
FLASH OVER TRUNK
ND-91285-001(E)
DECEMBER, 1999