NEC NEAX 2000 Programming Manual page 982

(1/1)
GENERAL DESCRIPTION
This feature allows users to redial the last station or outside number they dialed using a feature access
key. This is useful when the called station is busy or does not answer.
STATION APPLICATION
term
All D s
OPERATING PROCEDURE
1. Go off-hook and receive Dial Tone.
2. Press Redial key followed by # key, or dial the LAST NUMBER CALL feature access code.
3. The system will redial the last number dialed from that station.
SERVICE CONDITIONS
1. The maximum number of digits that can be stored for LAST NUMBER CALL is 32.
2. Dialing digits after going off-hook replaces previously stored digits with the new digits.
3. When the STEP CALL feature is used, the final destination number is stored in memory.
4. Pressing the Redial key when the D
the Speaker key LED.
5. This feature stores numbers dialed on the D
ANCES. This feature does not store DIAL INTERCOM or data calls.
Page 200
Revision 1.0
LAST NUMBER CALL - D
term
is idle displays the stored number on the LCD, and turns on
term
's My Line or Sub Line, or TRUNK LINE APPEAR-
ND-91285-001(E)
DECEMBER, 1999
term