Automated Attendant - NEC NEAX 2000 Programming Manual

AUTOMATED ATTENDANT

PROGRAMMING
START
Assign the data for Automated Attendant
CM30
to the required trunks.
When providing a Night Mes-
NOTE:
sage for Automated Attendant,
the 2nd Answering Message
which is assigned by CM49
Y=00>2nd data 02XX is used for
the Night Message. In that case,
the 2nd data 08 of CM30 Y=30,
31 cannot be specified for han-
dling of busy/not available Auto-
mated Attendant destination.
A
DESCRIPTION
Y=02
•
Terminating System in Day Mode
Y=03
•
Terminating System in Night Mode
Y=40 Terminating System in Mode A
•
Y=41 Terminating System in Mode B
•
(1) 000-255: Trunk No.
(2) 09: Automated Attendant
Y=30 Handling of busy/not available
•
Automated Attendant destination
in Day Mode
Y=31 Handling of busy/not available
•
Automated Attendant destination
in Night Mode
(1) 000-255: Trunk No.
(2) 00 : C.O. line release
01 : Forwarded to TAS
03 : Forwarded to Attendant Console
04 : Forwarded to DIT Station
05 : Music and DT connection for
Redial
06 : DT connection for redial
08 : 2nd Answering Message and DT
connection for redial
15 : C.O. line release
Y=32 Handling of timed-out Automated
•
Attendant call in Day Mode
Y=37 Handling of timed-out Automated
•
Attendant call in Night Mode
(1) 000-255: Trunk No.
(2) 00 : C.O. line release
01 : Forwarded to TAS
03 : Forwarded to Attendant Console
04 : Forwarded to DIT station
06 : DT connection for redial
15 : C.O. line release
– 56 –
AUTOMATED ATTENDANT
DATA
NOTE
A2056-10