NEC NEAX 2000 Programming Manual page 237

E
CM41
Assign an access code for the DTI trunk
CM20
route used as a C.O.line interface.
The Least Cost Routing or Route Advance feature is also available for call origina-
NOTE:
tion via the DTI.
Refer to the following feature programming.
LEAST COST ROUTING-3/6 DIGIT
LEAST COST ROUTING-TIME OF DAY ROUTING
ROUTE ADVANCE
END
DESCRIPTION
page 420
DIRECT DIGITAL INTERFACE (DDI)
Y=3
•
(1) 10: Ground Start release (Loop off) de-
tect timing
(2) 01-15: 64 ms.-960 ms.
If no data is set, the default setting is 384
ms.
Y=3
•
(1) 11: Ground Start release (Ground off)
detect timing
(2) 01-15: 64 ms.-960 ms.
If no data is set, the default setting is 384
ms.
Y=3
•
(1) 12: Ground Start (Return Ground) de-
tect timing
(2) 01-15: 1 sec.-15 sec.
If no data is set, the default setting is 7 sec.
Y=0-3 Numbering Plan Group 0-3
•
(1) X-XXXX: Access Code
(2) 100-163: Trunk Route No. 00-63
page 286
– 217 –
PROGRAMMING
24-DTI Assignment
DATA
(64 ms. increments)
(64 ms. increments)
(1 sec. increments)
page 298
A2195-10