NEC NEAX 2000 Programming Manual page 602

To provide Voice Message Waiting-Individual:
(1) When you leave a message for the desired station without using the Single Digit Feature
Access Code, do the following programming.
START
CM10 Assign Digital Announcement Trunk card
number to the required LEN.
The Digital Announcement Trunk
NOTE:
card number must be assigned
to the first LEN (Level 0), the
third LEN (Level 2), the fifth LEN
(Level 4) and the seventh LEN
(Level 6) of each LT slot.
CM12 Assign the Service Restriction Class A for
the Voice Message Waiting-Individual.
CM15
Assign the Set/Cancel/Retrieve for the
Voice Message Waiting-Individual.
CM13 Assign Message Waiting Service to the re-
quired stations.
A
DESCRIPTION
(1) 000-763: LEN
(2) EB002-EB127: Digital Announcement
For PIM0/1: EB002-EB031
For PIM2/3: EB032-EB063
For PIM4/5: EB064-EB095
For PIM6/7: EB096-EB127
NOTE:
Y=02
•
(1) X-XXXXXXXX: Station No.
(2) XX ZZ
XX: 00-15 : Service Restriction Class
Y=41
•
(1) 00-15: Service Restriction Class A as-
(2) 1 : Allow
Y=03
•
(1) X-XXXXXXXX: Station No.
(2) 0: To provide
– 582 –
VOICE MESSAGE SYSTEM
DATA
Trunk Card No.
EB000 and EB001 are dedi-
cated to built-in Digital An-
nouncement Trunk of the MP
card.
A
signed by CM12 Y=02
A2580-10