NEC NEAX 2000 Programming Manual page 935

DIRECT STATION SELECTION (DSS) CONSOLE (CONT'D)
OPERATING PROCEDURE
To display station Busy Out (BYO) status:
1. Depress the Function Mode key on the DSS CONSOLE assigned for BUSY OUT STATUS dis-
play. An LED associated with the BYO key lights.
2. When stations are currently in the BUSY OUT state, their associated LED will light green.
3. Depress the same Function Mode key to return to DSS mode, if desired.
SERVICE CONDITIONS
1. If the system is initialized (Reset), the Console Function Mode will return to DSS.
2. The BUSY OUT STATUS of a station cannot be set or cancelled from a BUSY OUT STATUS CON-
SOLE.
3. Refer to the DSS CONSOLE and the UNIFORM CALL DISTRIBUTION Features and Specifications
for more details.
GENERAL DESCRIPTION
This feature allows a DSS CONSOLE associated with a D
(DND) CONSOLE. This feature is activated by the use of a Function Mode key on a DSS CONSOLE.
DND set status for each station is indicated by a green LED associated with each key. In addition, the
term
D user can set/cancel the DND status of other stations using the DND CONSOLE.
STATION APPLICATION
All stations with a DSS CONSOLE
OPERATING PROCEDURE
To set and cancel DO NOT DISTURB (DND):
1. Depress the DND key. When stations are currently in DND their associated LED will light green.
2. Depress the Function Mode key: an LED associated with the Function Mode key will light red.
3. Depress the desired DSS key(s) to set or cancel. A lit LED indicates DND is set.
4. Depress the DND key again to return to DSS mode, if desired.
DO NOT DISTURB CONSOLE
ND-91285-001(E)
DECEMBER, 1999
term
to be used as a DO NOT DISTURB
(3/6)
Page 153
Revision 1.0