NEC NEAX 2000 Programming Manual page 671

D
CM49
When providing DAT, assign the answer-
ing message for Wake Up to the DAT card
or MP built-in DAT.
Specify the duration of Wake Up call.
CM41
When providing the DAT, specify the dura-
tion of message replay timer for Automatic
Wake Up.
CM42 Specify the number of Wake Up call at-
tempts before abandonment.
Specify the maximum number of Wake Up
calls can be set at the same time.
E
DESCRIPTION
Y=00
•
(1) 000-001: Built-in DAT on MP card
002-127: Digital Announcement Trunk
(2) 0C XX: Answering message on Auto-
XX: 00-63: Message No.
Y=08
•
(1) 00-63: Tenant No.
(2) 00-63: Message No. assigned by
Y=0
•
(1) 23
(2) 01-08: 4 sec.-32 sec.
(4 sec. increments)
If no data is set, the default setting is
28-32 sec.
Y=0
•
(1) 52
(2) 01-99: 4 sec.-396 sec.
(4 sec. increments)
If no data is set, the default setting is
60-64 sec.
(1) 03
(2) 01-05: Number of attempted Wake Up
If no data is set, the default setting is
05.
(1) 04
(2) 01-32: Max. number of stations
If no data is set, the default setting is
16.
– 651 –
AUTOMATIC WAKE UP
DATA
Card No. assigned by CM10
matic Wake Up
CM49 Y=00
calls
A2636-10