NEC NEAX 2000 Programming Manual page 513

F
CM44
The external alarm driver function for the
SMDR buffer overflow.
When sending the tenant information (00-
CMD012
63) to the SMDR terminal, assign a Group
number to each station or Attendant Con-
sole.
CMD015 Assign the Charging Station Class number
to each station number.
Specify the direction for sending of billing
CMD016
information on C.O. outgoing calls.
G
DESCRIPTION
STATION MESSAGE DETAIL RECORDING (SMDR)
(1) XX Y
XX : 00-31: DK Card No. assigned by
Y : 0-3: Circuit No.
313: MP built-in External Equipment In-
terface
(2) 3001: When CMD001>80/100/120/140
is set to "4"
3002: When CMD001>80/100/120/140
is set to "5"
(1) X-XXXX: Station No.
(2) 000-063: Group No.
(1) 00-07: ATTCON No. 0-7
(2) 000-063: Group No.
(1) X-XXXX: Station No.
(2) 00 -15: Station Class No.
(1) XX 16: Sending of billing information of
XX : Service Class No. assigned by
CMD015
(2) 0 : Not sent
1 : To send
(1) XX 17: Sending of billing information of
XX : Service Class No. assigned by
CMD015
(2) 0 : Not sent
1 : To send
– 493 –
PROGRAMMING
SMDR with AP00 Programming
DATA
CM10 (E800-E831)
C.O. outgoing calls to the PMS/
SMDR terminal set to "4" by
CMD001>80/100/120/140
C.O. outgoing calls to the
SMDR terminal set to "5" by
CMD001>80/100/120/140
A2486-10