NEC NEAX 2000 Programming Manual page 368

To provide External Hold Tone Source through the COT and DK card:
START
CM10 Assign the COT and DK for interface with
External Hold Tone Source to required
LEN.
The DK card number must be as-
NOTE 1:
signed to the first LEN (Level 0)
and third LEN (Level 2) of each
LT slot.
The COT card number must be
NOTE 2:
assigned for each tenant. One
External Hold Tone Source can
be provided per tenant.
Set the function of External Hold Tone
CM44
Source interface to the DK card.
A
DESCRIPTION
(1) 000-763: LEN
(2) DA00-DA09: COT Card No.
E800-E831 : DK Card No.
For PIM0/1 : E800-E807
For PIM2/3 : E808-E815
For PIM4/5 : E816-E823
For PIM6/7 : E824-E831
NOTE 3:
(1) XX Y
XX : 00-31: Card No. E800-E831 as-
Y : 0-3: Circuit No.
313: MP built-in External Equipment In-
terface
(2) 0000-0009: External Hold Tone for Mu-
– 348 –
MUSIC ON HOLD
DATA
NOTE 2
Circuit No. 3 of E831 is used
for built-in External Equip-
ment Interface on MP card by
setting CM44.
signed by CM10
sic on Hold
A2346-10