NEC NEAX 2000 Programming Manual page 430

To access the Digital Announcement Trunk (DAT) card via Remote Access to System, add the
following programming.
START
CM10
Assign Digital Announcement Trunk card
number to the required LEN.
The Digital Announcement Trunk
NOTE:
card number must be assigned
to the first LEN (Level 0), the
third LEN (Level 2), the fifth LEN
(Level 4) and the seventh LEN
(Level 6) of each LT slot.
Assign the Service Restriction Class A for
CM2A
Digital Announcement Trunk access to the
required ID Code Pattern number.
CM15 Allow Digital Announcement Trunk access
in the Service Restriction Class A as-
signed by CM2A Y=12.
CMD5 Assign the Service Restriction Class A for
Digital Announcement Trunk access to the
required ID Code, when providing Remote
Access to System with an Application Pro-
cessor (AP01).
Allow Digital Announcement Trunk access
CM15
in the Service Restriction Class A as-
signed by CMD5 Y=3.
A
DESCRIPTION
REMOTE ACCESS TO SYSTEM
(1) 000-763: LEN
(2) EB002-EB127: Digital Announcement
For PIM0/1: EB002-EB031
For PIM2/3: EB032-EB063
For PIM4/5: EB064-EB095
For PIM6/7: EB096-EB127
NOTE:
Y=12
•
(1) 0000-2999: ID Code Pattern No.
(2) 00-15 : Service Restriction Class A
Y=33
•
(1) 00-15: Service Restriction Class A
(2) 1 : Allow
Y=3
•
(1) X-X...X: ID Code (Max Number of digits
(2) 201 XX 0000
XX: 00-15 : Service Restriction Class
Y=33
•
(1) 00-15: Service Restriction Class A as-
(2) 1 : Allow
– 410 –
DATA
Trunk Card No.
EB000 and EB001 are
dedicated to built-in Digital
Announcement Trunk of the
MP card.
assigned by CM2A Y=00-
09
assigned by CM2A Y=12
specified by CM42>13)
A
signed by CMD5 Y=3
A2397-10