NEC NEAX 2000 Programming Manual page 916

(1/1)
GENERAL DESCRIPTION
This feature enables internal and external calls to ring immediately at the terminating station, but also,
after a programmable period of time has elapsed, to ring at secondary D
STATION APPLICATION
term
All D s
OPERATING PROCEDURE
No manual operation is required.
SERVICE CONDITIONS
1. DELAYED RINGING is assigned in system programming on a per line key basis.
2. The timing of call termination to the start of DELAYED RINGING is programmable in system data, by
increments of 2 seconds to a maximum of 40 seconds (default value =10 seconds).
3. When DELAYED RINGING and CALL FORWARDING - DON'T ANSWER are applied to the same
call, the feature which timeouts first will take priority.
Page 134
Revision 1.0
DELAYED RINGING - D
ND-91285-001(E)
DECEMBER, 1999
term
term
s with that line appearance.