Fax Arrival Indicator-D Term - NEC NEAX 2000 Programming Manual

FAX ARRIVAL INDICATOR-D
PROGRAMMING
Hot lines or House Phone feature assignment is used to implement this feature.
The number of facsimile station numbers and facsimile call station numbers that can be assigned
varies with each of the following cased.
• When Hot Lines-Inside/Outside are used, a maximum of 100 facsimile stations can be as-
signed. In addition, a maximum of 100 facsimile call stations can be assigned.
• When House Phone groups are used, a maximum of four facsimile stations can be assigned.
In addition, there is no limit to the number of facsimile call stations that can be assigned to each
facsimile station.
(1) Hot Line
START
CM10 Assign the fax call station number. This
number is used as the fax call indicator
button on the D
ber to which the incoming fax call is direct-
ed.
Assign a virtual number to be used as a
CM11
fax call station number. (Similar to CM10
above but using a virtual extension instead
of a real station number.)
Assign the function of fax call station to the
CM13
station or virtual extension assigned
above in either CM10 or CM11.
A
DESCRIPTION
term
. Also, this is the num-
– 254 –
FAX ARRIVAL INDICATOR-D
term
(1) 000-763: LEN
(2) X-XXXXXXXX : Single Line Station
FX-FXXXXXXX: My Line No.
(1) 000-255: Virtual LEN
(2) X-XXXXXXXX: Virtual Extension No.
Y=29
•
(1) X-XXXXXXXX: Station No.
(2) 0 : FAX call station
1 : Ordinary station
term
DATA
No.
A2247-10