Dialed Number Identification Service (Dnis) - NEC NEAX 2000 Programming Manual

DIALED NUMBER IDENTIFICATION SERVICE (DNIS)

PROGRAMMING
START
CM08 Provide the system with Diversion Display.
CM35 Specify the Incoming Call Identification
(ICI) key to which each LDN call or Tie
Line call from each trunk route will termi-
nate.
CM90 Assign the required number of LDN keys
on ATTCON/DESKCON.
Assign the indialed number to each LDN
CM50
key or Tie Line key assigned by CM90. The
indialed number should be different from
any numbers assigned by CM10 and
CM11.
Provide the system with LDN Diversion
CM08
feature.
A
DIALED NUMBER IDENTIFICATION SERVICE (DNIS)
DESCRIPTION
(1) 204
(2) 0: To provide
Y=15
•
(1) 00-63: Trunk Route No.
(2) 00-07: C.O. Incoming Call 0-7
40-47: Tie Line Incoming Call 0-7
Y=00
•
(1) ATTCON No. (E000-E007) +
No.
(2) F6000-F6007: C.O. Incoming Call 0-7
F6040-F6047: Tie Line Incoming Call
Y=01 For DID
•
(1) 0 : Effective data in CM35 Y=15
1-8: LDN key 0-7 assigned by CM90
(2) X-XXXX: Indialed No.
Y=02 For Tie Line
•
(1) 0 : Effective data in CM35 Y=15
1-8: Tie Line key 0-7 assigned by CM90
(2) X-XXXX: Indialed No.
(1) 205
(2) 0: Available
– 192 –
DATA
,
+ Key
0-7
A2190-10