Pad Lock - NEC NEAX 2000 Programming Manual

PAD LOCK

PROGRAMMING
To provide Pad Look feature, Authorization Code and Maid Status Code assignment is used.
There are two kinds of processor for Authorization Code.
One is MP card, the other is AP01 card.
For MP card, EXPMEM card can be used to expand the number of codes.
(1) With AP01 card:
START
CM05
Assign the AP number to AP01 card.
The AP number must match the SENSE
switch on the AP01 card.
CM08 Designate the AP01 card for Authorization
Code.
Specify the Service Set Tone after dialing
the access code for Authorization Code.
Set the data for 281 to 1. (Maid ID Code is
not used.)
Assign the Service Restriction Class A al-
CM15
lowed for Authorization Code feature.
Assign allowed class and restricted class
for Maid Status feature in the Service Re-
striction Class B.
A
DESCRIPTION
INITIAL
Y=0
•
(1) 04-15: AP No.
(2) 07: AP01 card
(1) 216: Designation of Processor for Au-
(2) thorization Code
1 : AP01 card
(1) 362: Service Set Tone after dialing the
access code
(2) 1 : Service Set Tone
(1) 281
(2) 1 : Not available
Y=31 Authorization Code
•
(1) 00-15: Service Restriction Class A
(2) 1 : Allow
Y=75 Maid Status
•
(1) 00-15: Service Restriction Class B
(2) 0 : Restricted
1 : Allow
– 369 –
PAD LOCK
DATA
A2369-10