Pooled Line Access-D Term - NEC NEAX 2000 Programming Manual

POOLED LINE ACCESS-D
PROGRAMMING
START
Assign the Pooled Lines (Virtual Line sta-
CM11
tion number) to the required Virtual LEN.
The Virtual LEN has no relation with the physical LEN used in CM10. Therefore,
NOTE:
any Virtual LEN can be assigned to each Virtual Line station number.
However, the Virtual Line station number should be different from the Single Line
number assigned by CM10.
Assign the Pooled Line keys to each D
CM90
Pooled Lines 00-63 can answer a call ter-
minated to tenants 00-63 respectively, and
can originate a call using trunk routes
00-63 respectively.
Polled Line
00
01
63
Assign a trunk route number and tenant
CM30
number to the trunks in the Pooled Line
group.
Refer to the Command Manual
NOTE:
for the Resident System pro-
gram.
A
term
DESCRIPTION
Origination Termination
Trunk Route 00 Tenant 00
01
Trunk Route 63 Tenant 63
(1) 000-255: Virtual LEN
(2) X-XXXXXXXX: Virtual Line Station No.
term
. Y=00
•
(1) My Line No. +
(2) F4100-F4163: Pooled Line 00-63
01
Y=00 Trunk Route Allocation
•
(1) 000-255: Trunk No.
(2) 00-63: Trunk Route No.
Y=01 Allocation of tenants to trunks
•
(1) 000-255: Trunk No.
(2) 00-63: Tenant No.
– 384 –
POOLED LINE ACCESS-D
DATA
,
+ Key No.
NOTE
term
A2382-10