NEC NEAX 2000 Programming Manual page 909

GENERAL DESCRIPTION
This service feature permits any station to alternate between two different CLASSES OF SERVICE -
INDIVIDUAL, one for DAY and another for NIGHT. System data can be programmed so that once the
Attendant Console has entered the NIGHT CONNECTION mode, a station's CLASS OF SERVICE will
be automatically changed when required. Class may be upgraded or downgraded, and trunk groups nor-
mally controlled by the Attendant in the daytime may be opened to station control in the NIGHT mode.
STATION APPLICATION
DESK CONSOLE
SMART CONSOLE
OPERATING PROCEDURE
From DESK CONSOLE:
1. Depressing the NIGHT key changes service class.
2. Depressing the NIGHT key again restores normal CLASS OF SERVICE.
From SMART CONSOLE:
To change DAY to NIGHT mode:
1. Dial the MODE feature access code or depress the MODE key and the associated red LED
lights. The LCD displays "DAY" for day mode and the LED of the DAY key lights green.
2. Depress the NIGHT key and the associated LED lights red. The LCD changes from "DAY" to
"NIGHT".
3. Depress the ANS key and receive Service Set Tone. The LCD displays "SET NIGHT". The
mode of the console is now changed from DAY to NIGHT mode.
4. Depress the RLS key.
To change NIGHT to DAY mode:
1. Depress the MODE key and the associated red LED lights.
2. Dial a predetermined password number which will display on the LCD.
3. Depress the DAY key and the associated green LED lights. The LCD display changes from
"NIGHT" to "DAY".
4. Depress the ANS key and receive Service Set Tone. The LCD displays "SET DAY".
The mode of the console is now changed from NIGHT to DAY.
5. Depress the RLS key.
DAY/NIGHT CLASS OF SERVICE
ND-91285-001(E)
DECEMBER, 1999
(1/2)
Page 127
Revision 1.0