NEC NEAX 2000 Programming Manual page 205

• When using Dial By Name for Speed Calling-Station, D
System (1000-Slot Memory):
START
CM73 Allocate the memory area for Speed Call-
ing-Station to each station when using Dial
By Name for Speed Calling-Station.
1000-Slot Memory Block number 4-9 (6000 Memory Parcels) can be used when
NOTE:
the Expansion Memory card (PZ-M537) is mounted on the MP card.
For using this memory area, there are several conditions as mentioned below:
• This memory area cannot be used for Speed Calling with Speed Calling keys
• When exchanging an Expansion Memory card for another, data setting for this
• The Office Data in this memory area cannot be saved and loaded by MAT oper-
A
DESCRIPTION
provided by CM90: F11XX on a D
ing-Station.
memory area must be reentered.
ations.
term
One Touch Key and Speed Calling-
(1) X-XXXXXXXX: Station No.
(2) W XX Y ZZ
(3) W : 0-3 (Basic), 4-9 (Option): 1000-Slot
Memory Block No.
XX: 00-99: Memory Start Block No.
(10-Slot Memory Block)
Y : Facility for programming the dialed
number from the Station
0/1: Effective/Ineffective
ZZ : 01-10: Number of 10-Slot Memory
Blocks
term
, and cannot also be used for Speed Call-
– 185 –
term
DIAL BY NAME-D
DATA
NOTE
A2179-10