NEC NEAX 2000 Programming Manual page 629

A
Assign the timer data for DID call, if re-
CM31
quired. (for Indonesia and Norway)
Assign the Forward GII signal to terminate
a call to Attendant Console, if required.
CM31 Y=9 is effective only when
NOTE:
CM08>020 is assigned to 1.
CM08 Select whether a call is terminated to At-
tendant Console by receiving Forward GII
signal or not.
Assign the meaning of sending Backward
GB signal when terminating to Attendant
Console.
Assign the meaning of sending Backward
GB signal when terminating by Tandem
Connection or converting received digits.
Select whether requesting ANI signal to
PSTN or not.
CM12 Specify the kind of idle status of called sta-
tion on DID call.
B
DESCRIPTION
INITIAL
FEATURES FOR OTHER COUNTRIES ONLY
MFC-INCOMING CALL/MFC-OUTGOING CALL
Y=B
•
(1) 05-07
(2) 01-31
NONE
(1) 11-15
(2) 00-12
NONE
Y=9
•
(1) 01-15: Forward GII-1 through Forward
(2) 00 : Terminating to Attendant Console
NOTE
15 : Terminating to station
(1) 020
(2) 0/1
(1) 470
(2) 0/1
(1) 471
(2) 0/1
(1) 472
(2) 0/1
Y=11
•
(1) X-XXXXXXXX: Station No.
(2) 0 : Called Station idle (No Charge)
1 : Called Station Control (Charge)
2 : Called Station idle (Charge)
3 : Called Station idle (Charge)
– 609 –
DATA
Refer to the
Command Manual.
GII-15
NOTE: Refer to the "MFC Data
Assignment Table for
Each Country".
page 615
A2594-10