NEC NEAX 2000 Programming Manual page 74

B
CMD5
Set the Authorization Code and its tempo-
rary Service Class.
By entering the Authorization Code, the
Check Code will be displayed on the MAT
or CAT.
Assign the station number corresponding
to each Authorization Code.
END
DESCRIPTION
Y=3
•
(1) X-X...X: Authorization Code (Max.
(2) A BB CC DD EE
A : Type of Temporary Service Class
0: Unrestricted
1: Fully-Restricted
2: As per BB CC DD EE
9: Delete the ID Code
BB: 01-08: Trunk Restriction Class:
assigned by CM35 Y=51-68
CC: 00-15: Service Restriction Class A
assigned by CM12 Y=02 and
CM15
DD: 00-15: Service Restriction Class B
assigned by CM12 Y=02 and
CM15
EE: 00-15: Service Restriction Class C
assigned by CM12 Y=02 and
CM15
Y=A
•
(1) X-X...X: Authorization Code set by
(2) X-XXXX: Station No.
– 54 –
AUTHORIZATION CODE
DATA
number of digits specified by
CM42>11)
CMD5 Y=3
A2042-10