NEC NEAX 2000 Programming Manual page 814

(1/2)
GENERAL DESCRIPTION
term
The D can be programmed to function as an Operator Console. This Operator Console has limited
access to Operator Console-related features and functions and can be substituted where an Operator Con-
sole is required but an Attendant Console is not necessary. When a DSS CONSOLE is associated with this
Attendant Terminal, enhanced operation is available. Please refer to the Features and Specifications of
DIRECT STATION SELECTION (DSS) CONSOLE for detailed information.
STATION APPLICATION
term
All D s with an LCD
OPERATING PROCEDURE
To answer and transferring an incoming C.O. Line call:
1. Press the flashing line key or Answer key.
2. The first available LOOP key LED lights steady green; incoming indication stops; LCD shows
trunk name and number.
3. Press Transfer key and dial station number to be transferred to, or press desired DSS key. LCD
shows called station number.
4. Press RLS key or go on-hook.
To hold a call:
1. Press Hold key. LOOP key flashes green.
2. Go on-hook or press RLS key.
To retrieve a held call:
1. Go off-hook.
2. Press flashing LOOP key. LED indication goes to steady green.
3. Speak.
SERVICE CONDITIONS
1. Transferring calls is possible with the Transfer key.
2. Answering calls is possible using the Answer key or by direct line key selection.
3. Normal internal call operation is available using the station's primary extension, a secondary extension,
or a software line appearance.
4. A DSS CONSOLE can be associated with the Attendant Terminal, and its keys can be assigned as
Direct Station Selection DSS keys and used in conjunction with the RLS key.
5. An RLS key can be assigned on the DSS CONSOLE's line keys.
Page 32
Revision 1.0
ATTENDANT TERMINAL-D
ND-91285-001(E)
DECEMBER, 1999
term