Overflow Announcement-Ucd - NEC NEAX 2000 Programming Manual

OVERFLOW ANNOUNCEMENT-UCD

PROGRAMMING
START
CM08
Assign the incoming call to queuing mode
when all UCD stations are busy.
CM10 Assign the DAT card to the required LEN.
The DAT card number must be
NOTE:
assigned to the first LEN (Level
0), the third LEN (Level 2), the
fifth LEN (Level 4) and the sev-
enth LEN (Level 6) of each LT
slot.
CM17 Designate the number of queuing in each
UCD group.
CM42 Specify the maximum number of queuing
in each UCD group.
CM41 Specify the message duration of UCD
Overflow Announcement.
Assign the function of UCD Overflow An-
CM49
nouncement to the DAT card.
END
DESCRIPTION
OVERFLOW ANNOUNCEMENT-UCD
(1) 212
(2) 1 : Queuing
(1) 000-763: LEN
(2) EB002-EB127: DAT Card No.
For PIM0/1: EB002-EB031
For PIM2/3: EB032-EB063
For PIM4/5: EB064-EB095
For PIM6/7: EB096-EB127
NOTE:
Y=B
•
(1) X-XXXXXXXX: Pilot station No. of the
(2) 0 : To provide (See CM42>16)
1 : Not provided
(1) 16
(2) 01-99: Number of queuing in each UCD
If no data is set, the default setting is no lim-
it.
Y=0
•
(1) 66
(2) 01-99: 4 sec.-396 sec.
If no data is set, the default setting is 60-64
sec.
Y=00
•
(1) 000-001: Built-in DAT on MP card
002-127: DAT Card (EB002-EB127)
(2) 12XX
XX: 00-15: UCD Group No.
– 366 –
DATA
EB000 and EB001 are dedi-
cated to built-in Digital An-
nouncement Trunk of the MP
card.
UCD group
group
(4 sec. increments)
No. assigned by CM10
A2356-10