NEC NEAX 2000 Programming Manual page 945

GENERAL DESCRIPTION
This service feature provides an LCD of the time elapsed while a D
STATION APPLICATION
term
All D s with an LCD
OPERATING PROCEDURE
No manual operation is required.
SERVICE CONDITIONS
1. The elapsed time is displayed in the eight left-hand positions of the LCD.
2. The elapsed time can reach a maximum of 9 hours, 59 minutes and 59 seconds. After that time, the
clock returns to zero.
3. A continuous time display will occur during CONSULTATION HOLD - ALL CALLS, THREE-WAY
CALLING, EXCLUSIVE HOLD - D
4. When a call is transferred, the time display of the party receiving the transfer begins from zero.
term
5. When the D returns to the original call from CALL TRANSFER - ALL CALLS or CALL HOLD,
the elapsed time begins at zero.
6. The elapsed time is not displayed when the station is in a specific condition such as:
a. Three-Way conference
b. Connected to a trunk with a held trunk, as in the case of consultation hold.
ELAPSED TIME DISPLAY - D
term
and NON-EXCLUSIVE HOLD - D
ND-91285-001(E)
DECEMBER, 1999
term
term
is connected to any trunk.
term
.
Revision 1.0
(1/1)
Page 163