NEC NEAX 2000 Programming Manual page 953

FEATURE ACTIVATION FROM SUBLINE - D
GENERAL DESCRIPTION
This service feature allows a D
STATION APPLICATION
term
All D s
OPERATING PROCEDURE
Refer to the applicable feature for operating procedure.
SERVICE CONDITIONS
1. When the predetermined service/cancel operation for each of the following service features from a Sub
term
Line of a D , the corresponding service feature is set/cancelled for the Sub Line concerned.
a. AGENT BUSY OUT - UCD
b. CALL FORWARDING - ALL CALLS
c. CALL FORWARDING - BUSY LINE
d. CALL FORWARDING - DON'T ANSWER
e. CALL PICKUP - GROUP
f. RETURN SCHEDULE - D
2. After a call has been originated from a Sub Line, CALL BACK or OUTGOING TRUNK QUEUEING
(Note) service can be set from that Sub Line. In this case, the My Line of the station that set the fea-
ture will be recalled.
Note: If OUTGOING TRUNK QUEUEING service is already set to My Line, OG-Queueing service set-
ting from a Sub Line is restricted.
3. When an incoming call terminates to the CALL PICKUP - GROUP to which the Sub Line being used
term
by a D user belongs, the incoming call is picked up.
term
user to activate each of the PBX service features from a Sub Line.
term
ND-91285-001(E)
DECEMBER, 1999
(1/1)
term
Page 171
Revision 1.0