NEC NEAX 2000 Programming Manual page 490

STATION/ATTENDANT CONTROLLED CONFERENCE (6/10-PARTY CONFERENCE)
To use this feature by using the feature keys assigned on the D
START
CM90 Assign the feature key for 6/10-Party Con-
ference, on the D
leader.
Assign maximum of 6 or 10 Multiple Line
keys on the D
er.
CM12 Specify the Multiple Line number set by
CM90 to be accommodated to D
CM10 Assign the card number of the Conference
trunk (CFT card) to the required LEN.
The CFT card number must be
NOTE:
assigned to the first LEN (Level
0) of each LT slot.
CM12
Assign the Service Restriction Class B for
Conference leader.
CM15 Allow Conference trunk access for Confer-
ence Leader in the Service Restriction
Class B assigned by CM12 Y=02.
END
HARDWARE REQUIRED
CFT card × 1: for 6 participants (inclusive of the leader)
CFT card × 2: for 10 participants (inclusive of the leader)
term
D and DLC card, if required
DESCRIPTION
term
of the Conference
term
of the Conference lead-
term
INITIAL
term
Y=00
•
(1) My Line No. +
(2) F0A85: 6-party conference
F0A86: 10-party conference
Y=00
•
(1) My Line No. +
(2) X-XXXXXXXX: Multiple Line No.
Y=05
•
. (1) X-XXXXXXXX: Multiple Line No.
(2) 0: Accommodated
(1) 000-763: LEN
(2) ED00-ED03: CFT Card No.
Y=02
•
(1) X-XXXXXXXX: My Line No.
(2) XX ZZ
ZZ: 00-15 : Service Restriction Class
Y=69 Conference Leader
•
(1) 00-15: Service Restriction Class B
(2) 1 : Allow
– 470 –
:
DATA
,
+ Key No.
,
+ Key No.
B
A2463-10