NEC NEAX 2000 Programming Manual page 144

E
Specify the maximum number of call
CMD003
record for D
Specify the maximum number of waiting
buffer for the Immediate Printout Call
Record for the Printer which is set to "16"
by CMD001>100/140.
Clear the billing memory.
CMD102
Before executing CMD102, be
NOTE:
sure to print out all of the stored
call records.
CMD102 deletes all of the stored
call records.
CMD003 Specify when the external equipment is
started depending on the number of the
remaining AP memory blocks.
Specify the threshold for the automatic
printout of the call record accumulation
overflow.
CMD004 Assign the time and day for daily/monthly
report with the Printer, if required.
When you provide the external alarm indi-
CM44
cation through the DK, specify the external
equipment starting condition when the call
record has reached the value specified by
CMD003>23, 27, 28, 30.
F
DESCRIPTION
term
TIMS.
AP OFF LINE
CALL INFORMATION SYSTEM (CIS)
(1) 28
(2) 0 : Not used
1-12000: 1 call-12000 calls
(1) 30
(2) 0 : Not used
1-1000: 1 call-1000 calls
(1) 0000
(2) CCC
(1) 27
(2) 0 : External Alarm is not executed
1-27000: 1 block-27000 blocks
(1) 31
(2) 0 : Printout is not executed
1-12000: 1 call-12000 calls
(1) 21-28
(2) XXXX: Time and Day
(1) XX Y
XX: 00-31: DK Card No. assigned by
Y : 0-3: Circuit No.
313: MP built-in External Equipment In-
terface
(2) 3000: When the call record has
reached the value specified by
CMD003>28
3003: When the call record has
reached the value specified by
CMD003>23 or 30
3004: When the call record has
reached the value specified by
CMD003>27
– 124 –
PROGRAMMING
TIMS Printer Programming
DATA
CM10 (E800-E831)
A2107-10