NEC NEAX 2000 Programming Manual page 804

(2/2)
ATTENDANT CONSOLE LOCKOUT-PASSWORD (CONT'D)
SERVICE CONDITIONS (CONT'D)
4. When the console is set to lockout condition, only the following operation can be executed:
a. Cancellation of lockout condition
b. These types of remaining calls on the loop keys can be handled:
• Unanswered calls
• Camped-on calls
• Automatic Recalls
• Held Call on LOOP key.
5. If there is a call park which has been set by the Attendant, the console cannot be set to lockout condi-
tion.
In this case, the operator hears Reorder Tone and the LCD shows "CALL PARK".
6. When the console is put into the lockout condition, if there are any uncompleted calls in loops with
LOOP Release feature, those uncompleted calls can appear on loops as automatic recalls.
Page 22
Revision 1.0
ND-91285-001(E)
DECEMBER, 1999