NEC NEAX 2000 Programming Manual page 561

A
Provide the system with Trunk to Trunk
CM08
Connection when no release signal arrives
from the incoming trunk route and answer
signal arrives from the outgoing trunk
route.
Provide the system with Trunk to Trunk
Connection transferred by a station or an
attendant, when no answer signal arrives
and release signal arrives from the outgo-
ing trunk route.
Specify the forced release timing for tan-
CM41
dem connection when the called party
does not answer.
This data is available when no release sig-
nal arrives from incoming trunk route.
END
DESCRIPTION
TRUNK TO TRUNK CONNECTION
(1) 324
(2) 0 : Available
1 : Not available
(1) 028
(2) 0 : Available
1 : Not available
Y=0
•
(1) 55
(2) 01-13: 12 sec.-60 sec.
If no data is set, the default setting is 20-24
sec.
– 541 –
DATA
(4 sec. increments)
A2536-10