NEC NEAX 2000 Programming Manual page 63

A
CM12 Assign each Loop Line number assigned
by CM11 as an Attendant Loop Line.
Assign the Service Restriction Class B for
the ICI key to the required ICI/OPR line
numbers assigned by CM11.
The Service Restriction Class
NOTE:
number for the Attendant Termi-
nal should be different from an
ordinary station.
CM15 Allow the ICI/OPE key in the Service Re-
striction Class B assigned by CM12 Y=02.
Assign a Hot Line station to each ICI/OPR
CM12
line number.
With this assignment, each ICI/OPR line is
restricted from call origination.
Assign a UCD station to each ICI/OPR line
CM17
number.
With this assignment, ICI/OPR lines are
provided the call queuing facility individu-
ally.
Assign the access code for Priority Call 0
CM20
used for Attendant Terminal access.
B
DESCRIPTION
ATTENDANT TERMINAL-D
Y=03
•
(1) AA01-AA75: Loop Line No. assigned
(2) 08: Attendant Terminal Loop Line
Y=02
•
(1) AB00-AB99: ICI/OPR Line No. as-
(2) XX ZZ
ZZ: 00-15 : Service Restriction Class
Y=73
•
(1) 00-15: Service Restriction Class B as-
signed by CM12 Y=02
(2) 0: ICI/OPE key
Y=03
•
(1) AB00-AB99: ICI/OPR No.
(2) 04: Hot Line
Y=1
•
(1) AB00-AB99: ICI/OPR Line No.
(2) 1: Pilot station
Y=2
•
(1) AB00-AB99: ICI/OPR Line No.
(2) 00-15: UCD Group No.
NOTE:
Y= 0-3 Numbering Plan Group 0-3
•
(1) X-XXXX: Attendant Terminal Access
(2) A088
– 43 –
DATA
by CM11
signed by CM11
B
Individual UCD Group num-
ber must be assigned to each
ICI/OPR line number.
Code
term
A2042-10