Name Display-D Term - NEC NEAX 2000 Programming Manual

NAME DISPLAY-D
PROGRAMMING
START
CM08
Provide the system with the Name Display
Service.
Specify station number and name display
when an incoming call begins ringing.
CM20 Assign the access code for station user
name entry from individual station.
Specify the time go back to date and time
CM08
display often the call answered.
Specify the duration to display the name.
CM35 Assign a trunk name number to each trunk
route.
A
term
DESCRIPTION
INITIAL
– 356 –
NAME DISPLAY-D
DATA
(1) 255
(2) 1 : To provide
(1) 335
(2) 0 : Station No. and name display only
when incoming call terminates to
prime line.
1 : Station No. and name display
when incoming call terminates to
prime line or My Line.
Y=0-3 Numbering Plan Group 0-3
•
(1) X-XXXX: Access Code
(2) A110
(1) 120
(2) 0 : 10 sec. later
1 : 6 sec. later
(1) 121
(2) 0 : Until call finished
1 : As per CM08>120
Y=03
•
(1) 00-63: Trunk Route No.
(2) 00-14: Trunk Name No.
15 : Kind of trunk route assigned by
CM35 Y=00 are displayed
16-63: Trunk Name No.
term
A2356-10