NEC NEAX 2000 Programming Manual page 934

(2/6)
DIRECT STATION SELECTION (DSS) CONSOLE (CONT'D)
SERVICE CONDITIONS (CONT'D)
5. Feature access keys cannot appear on the DSS CONSOLE.
6. The DSS CONSOLE can be provided for the following purposes:
• MW key ... MESSAGE WAITING Set/Cancel/Status Display
• DND key ... DO NOT DISTURB Set/Cancel/Status Display
• NT key ... Day/Night mode change for the associated tenant
• WU key ... AUTOMATIC WAKE UP NO ANSWER Cancel/Status Display
• RC key ... ROOM CUTOFF Set/Cancel/Status Display
• BYO key ... AGENT BUSY OUT - UCD Status Display
These keys must be assigned to the last three (3) keys (key no. 57, 58 and 59) on the DSS CONSOLE.
7. Key operation from MW, DND, WU, and BYO key on the DSS CONSOLE are effective for only the
first 48 DSS keys (key no. 00 to 47), which have two (2) LEDs (red and green) in each key. DSS, busy
status indication, and LINE LOCK OUT status indication are effective for all 60 keys on the DSS
CONSOLE.
8. When the following operations from the DSS CONSOLE are used, the Function Mode key must be
assigned to one of 60 DSS keys.
• MESSAGE WAITING Set/Cancel using MW key.
• DO NOT DISTURB Set/Cancel using DND key.
• AUTOMATIC WAKE UP NO ANSWER Cancel using WU key
9. A DLC card is required when a DSS CONSOLE is installed.
GENERAL DESCRIPTION
This feature allows a DSS CONSOLE associated with a D
CONSOLE. This feature is activated by use of a Function Mode key on a DSS CONSOLE. The BUSY
OUT STATUS for each station is indicated by a red LED associated with each key.
STATION APPLICATION
All stations with an associated DSS CONSOLE.
Page 152
Revision 1.0
BUSY OUT STATUS CONSOLE
ND-91285-001(E)
DECEMBER, 1999
term
to be used as a BUSY OUT STATUS