NEC NEAX 2000 Programming Manual page 944

(1/1)
GENERAL DESCRIPTION
This feature allows to make an outgoing call at first hand by pressing a ten key of D
Speaker key or going off-hook.
STATION APPLICATION
term
All D s
OPERATING PROCEDURE
Dial the desired station number by pressing ten key, without pressing Speaker key or going off-hook.
SERVICE CONDITIONS
1. An extension must be set as a Prime Line.
2. This feature is not available when the Prime Line is busy.
Page 162
Revision 1.0
DYNAMIC DIAL PAD - D
ND-91285-001(E)
DECEMBER, 1999
term
term
, without pressing