NEC NEAX 2000 Programming Manual page 598

To transfer a call from an Attendant to a VMS, if Camp-On is set to the transferred destination,
and that is not answered by predetermined timing:
START
CM08 Provide the system with VMS transfer.
CM41 Specify the timer of Attendant Recall for
Camp-On.
Specify the destination VMS station num-
CM51
ber when a Camp-On call is not answered.
The first data should be the tenant number
of the destination station called.
END
DESCRIPTION
(1) 428: VMS transfer with Camp-On
(2) 0: To provide
Y=0
•
(1) 00: Attendant Recall Timer
(2) 01-14: 2.4 sec.-33.6 sec.
15-24: 38.4 sec.-124.8 sec.
If no data is set, the default setting is 31.2-
33.6 sec.
Y=18 Destination VMS No. assignment
•
(1) 00-63: Tenant No.
(2) X-XXXXXXXX: VMS Pilot No.
– 578 –
VOICE MAIL INTEGRATION
DATA
(2.4 sec. increments)
(9.6 sec. increments)
A2566-10