NEC NEAX 2000 Programming Manual page 238

30-DTI Assignment
START
CM05 Assign an AP number to the DTI card.
The AP number assigned must match the
SENSE switch setting on the DTI card.
CM07 Assign trunk number to each channel
number on the DTI card. Channel 0 and 16
cannot be assigned.
The system allocates time slots
NOTE:
to consecutive channels from
lowest to the highest channel
number assigned. To minimize
the number of time slots allocat-
ed, assign trunk numbers to con-
secutive channels on each card.
Never skip channels in CM07.
CM30
Assign a trunk route number to each DTI.
DTI route must be separated
NOTE:
from any analog trunk route.
A
DESCRIPTION
INITIAL
INITIAL
DIRECT DIGITAL INTERFACE (DDI)
Y=0
•
(1) 04-15, 20-31: AP No.
(2) 09: DTI card
Y=01
•
(1) XX ZZ
XX: 04-15, 20-31: AP No. assigned by
ZZ : 01-15, 17-31: Channel No. of 30-
(2) D000-D255: Trunk No.
Any trunk number already assigned by
CM10 cannot be used.
Y=00
•
(1) 000-255: Trunk No. assigned by CM07
(2) 00-63: Trunk Route No.
– 218 –
PROGRAMMING
30-DTI Assignment
DATA
CM05 Y=0
DTI
Y=01
A2195-10