NEC NEAX 2000 Programming Manual page 234

B
CM30 Assign a trunk route number for C.O.line
Interface to each DTI.
The DTI route must be different
NOTE:
than any analog trunk route.
Specify the terminating system in Day
Mode or Night Mode, Mode A, or Mode B
for incoming C.O. calls.
C
DESCRIPTION
DIRECT DIGITAL INTERFACE (DDI)
Y=00
•
(1) 000-255: Trunk No. assigned by CM07
(2) 00-63: Trunk Route No.
Y=02 Day Mode
•
Y=03 Night Mode
•
Y=40 Mode A
•
Y=41 Mode B
•
(1) 000-255: Trunk No. assigned by CM07
(2) 02 : Trunk Line Appearance
03 : Trunk Line Appearance + TAS
04 : Direct-In Termination
08 : Dial-in
09 : Automated Attendant
10 : Attendant Console + TAS
11 : Attendant Console + Trunk Line
Appearance
12 : Attendant Console + Trunk Line
Appearance + TAS
14 : Termination to Attendant Console
16 : Remote Access to System
18 : ISDN Indial
31 : DID, Tie Line and any call which
is not handled by PBX
– 214 –
PROGRAMMING
24-DTI Assignment
DATA
Y=01
Y=01
A2195-10