Attendant Override - NEC NEAX 2000 Programming Manual

ATTENDANT OVERRIDE

PROGRAMMING
START
Provide the system with ATTENDANT
CM08
OVERRIDE.
Specify whether the Warning Tone is sent
to the connected parties.
• Three burst tone
[Australia/Other Countries]
• One burst tone
[New Zealand Only]
Specify the interval of the Warning Tone
sent to the connected parties.
Specify whether the Warning Tone is sent
to the outside party.
CM12 Assign Service Restriction Class A to
each station.
Allow Attendant Override called side in the
CM15
Service Restriction Class A assigned by
CM12 Y=02.
Assign the access code for Individual
CM20
Trunk Access.
A
DESCRIPTION
(1) 012
(2) 1 : Available
(1) 046
(2) 0 : Not sent
1 : To send
(1) 045
(2) 0 : Only once
1 : Every 4 sec.
(1) 076
(2) 0 : To send
1 : Not sent
Y=02
•
(1) X-XXXXXXXX: Station No.
(2) XX ZZ
XX: 00-15 : Service Restriction Class
Y=09
•
(1) 00-15: Service Restriction Class A as-
signed by CM12 Y=02
(2) 1 : Allow
Y=0-3 Numbering Plan Group 0-3
•
(1) X-XXXX: Access Code
(2) A081: Individual Trunk Access
– 39 –
ATTENDANT OVERRIDE
DATA
A
A2032-10