NEC NEAX 2000 Programming Manual page 847

GENERAL DESCRIPTION
This service feature permits all calls destined for a particular station to be routed to another station or
to the Attendant regardless of the busy or idle status of the called station. Activation and cancellation may
be accomplished by either the individual station user or the Attendant.
STATION APPLICATION
All stations
OPERATING PROCEDURE
To activate from an individual station:
1. Lift the handeset; receive Dial Tone.
2. Dial the CALL FORWARDING - ALL CALLS access code; receive Special Dial Tone.
3. Dial the desired target station number; receive Service Set Tone.
To monitor from an individual station:
1. Lift the handset.
2. When CALL FORWARDING - ALL CALLS has been set, special dial tone is heard.
3. Replace the handset.
To cancel from an individual station:
1. Lift the handset; receive Dial Tone.
2. Dial the CALL FORWARDING - ALL CALLS cancellation code; receive Service Set Tone.
To set from an Attendant Console:
1. Press an idle LOOP key.
2. Dial the CALL FORWARDING - ALL CALLS access code; receive Special Dial Tone.
3. Dial the originating station number.
4. Dial the desired target station number; receive Service Set Tone.
To cancel from an Attendant Console:
1. Press an idle LOOP key.
2. Dial the CALL FORWARDING - ALL CALLS cancellation code; receive Special Dial Tone.
3. Dial the originating station number; receive Service Set Tone.
SERVICE CONDITIONS
1. There is no limitation to the number of stations which can set CALL FORWARDING - ALL CALLS
simultaneously.
2. Stations may be assigned this feature via CLASS OF SERVICE - INDIVIDUAL programming in sys-
tem data.
CALL FORWARDING - ALL CALLS
ND-91285-001(E)
DECEMBER, 1999
(1/2)
Page 65
Revision 1.0