NEC NEAX 2000 Programming Manual page 783

GENERAL DESCRIPTION
This feature, when used with STATION MESSAGE DETAIL RECORDING (SMDR), allows station
users to enter a cost accounting or client billing code (up to 16 digits) into the system.
STATION APPLICATION
All stations
OPERATING PROCEDURE
To enter an ACCOUNT CODE from a station before accessing an outside line:
1. Lift the handset; receive Dial Tone.
2. Enter the ACCOUNT CODE feature access code.
3. Enter the ACCOUNT CODE.
4. Receive Dial Tone and dial the desired number (including outside line access code).
To enter an ACCOUNT CODE while connected to an outside line:
1. Depress the FLASH key (or momentarily depress the hookswitch) and receive feature Dial Tone.
2. Enter the ACCOUNT CODE feature access code.
3. Enter the ACCOUNT CODE and receive feature Dial Tone again.
4. Return to the original outside line by depressing the FLASH key (or momentarily depressing the
hookswitch).
OR
Dial a station number to transfer the call.
SERVICE CONDITIONS
1. The maximum number of digits in an ACCOUNT CODE is 10 when using the SMDR format; other-
wise, the maximum is 16. There is no limitation to the number of ACCOUNT CODEs used per sys-
tem. The feature access code for ACCOUNT CODE entry can be one to three digits.
2. A station user can enter an ACCOUNT CODE consisting of fewer digits than the maximum length
defined and indicate the end of the entry by depressing the # key. Therefore, the # key cannot be part of
an ACCOUNT CODE.
3. ACCOUNT CODE entry can be performed with an outside party on CONSULTATION HOLD. In this
case, feature dial tone is received instead of dial tone after entering the ACCOUNT CODE.
4. Stations are assigned this feature through CLASS OF SERVICE-INDIVIDUAL.
5. ACCOUNT CODEs can be output in the SMDR record for calls handled by OUTGOING TRUNK
QUEUING during connection to the outside line.
6. When multiple ACCOUNT CODEs are entered for the same call, only the last code entered will be
recorded by SMDR.
ACCOUNT CODE
ND-91285-001(E)
DECEMBER, 1999
(1/1)
Page 1
Revision 1.0