NEC NEAX 2000 Programming Manual page 32

A
CM41
Assign the Answer Signal Detect Timing
on the DTI trunks.
Assign the Process for detection of Meter-
ing Signal.
Assign the Metering Signal Detect Timing
on the DTI trunks.
END
HARDWARE REQUIRED
term
SMDR or D TIMS.
For DTI Metering, 30DTC is required.
DESCRIPTION
Y=3
•
(1) 01
(2) 01-15: 32 ms.-480 ms.
(32 ms. increments)
If no data is set, the default setting is
128 ms.
Y=3
•
(1) 14
(2) 00: Process 1 (for Australia)
01: Process 2 (for Argentina)
Initial Data: NONE (Process 1)
Y=3
•
(1) 15
(2) 01-15: 32 ms.-320 ms.
(32 ms. increments)
If no data is set, the default setting is
160 ms.
– 12 –
AC METERING COT
DATA
A2008-10