NEC NEAX 2000 Programming Manual page 485

B
CM08 Assign whether or not the system should
check the trunk restriction class of the for-
warded station during a Split Call Forward-
ing-Don't Answer-Outside.
CM90
Assign Call Forwarding-Don't Answer keys
term
to the D s, as required.
Assign Split Call Forwarding-Don't Answer
keys to the D
CM65 Select the feature available in each tenant
when an internal call and a Tie Line/C.O.
incoming call is terminated.
CM78 Assign the destination of Split Call For-
warding.
NOTE
END
DESCRIPTION
term
s, as required.
SPLIT CALL FORWARDING-DON'T ANSWER
(1) 387
(2) 0 : Follow trunk restriction class
1 : No check
Y=00
•
(1) My Line No. +
(2) F0016: Call Forwarding-Don't Answer
For setting the same key as Call Forward-
ing-Busy Line.
(2) F0012: Set/Cancel
(1) My Line No. +
(2) F0A82: Split Call Forwarding-Busy
Y=23
•
Internal Call or ATT assisted Call
Y=24 C.O. Incoming Call
•
Y=25 Tie Line Incoming Call
•
(1) 00-63: Tenant No.
(2) 0 : Split Call Forwarding
1 : Call Forwarding
(1) XX Y
XX: 00-63: Tenant No.
Y : 0-7: Block No.
(2) X-XX +
X-XX : Trunk Access Code
YY···Y: Called No. (Max. 26 digits)
X-XXXXXXXX: Station No. (1-8 digits)
– 465 –
DATA
,
+ Key No.
Set/Cancel
,
+ Key No.
Line/-Don't Answer Set/Cancel
,
+ YY···Y
(1-2 digits)
A2463-10