NEC NEAX 2000 Programming Manual page 499

(2) SMDR with AP00
The System outline of the SMDR with AP00 is shown below.
The SMDR consists of the AP00 and the external SMDR terminal.
• AP (AP00):
The AP stores various kinds of information which arrives from the MP on an event basis.
When a call is completed, the AP sends out the call information pertaining to that specific
call to the SMDR terminal.
Four AP (RS-232C) ports can be used for the SMDR terminal interface. The AP ports per-
form as DTE.
The system can accommodate a maximum of one AP00 card.
• SMDR Terminal:
Asynchronous PC is used as the SMDR terminal for receiving and processing the call infor-
mation.
The maximum number of SMDR terminal is two, which includes the number or Property
Management System (PMS) terminal.
LC
STATION
STATION MESSAGE DETAIL RECORDING (SMDR)
System Outline of SMDR with AP00
TDSW
AP (AP00)
EXP
MEM
TRUNK
MP
MP
– 479 –
SMDR TERMINAL 0/1
RS-232C
INTERFACE
MP : MAIN PROCESSOR
AP : APPLICATION PROCESSOR
EXPMEM: EXPANSION MEMORY
SYSTEM OUTLINE
A2477-10