NEC NEAX 2000 Programming Manual page 852

(1/2)
GENERAL DESCRIPTION
This service feature permits a call to a busy station to be immediately forwarded to a predesignated sta-
tion, to the Attendant Console.
STATION APPLICATION
All stations
OPERATING PROCEDURE
To set from an individual station:
1. Lift the handset; receive Dial Tone.
2. Dial the CALL FORWARDING - BUSY LINE access code; receive Special Dial Tone.
3. Dial the desired target station number; receive Service Set Tone.
To cancel from an individual station;
1. Lift the handset; receive Dial Tone.
2. Dial the CALL FORWARDING - BUSY LINE cancellation code; receive Service Set Tone.
To set from an Attendant Console:
1. Press an idle LOOP key.
2. Dial the CALL FORWARDING - BUSY LINE access code; receive Special Dial Tone.
3. Dial the originating station number.
4. Dial the desired target station number; receive Service Set Tone.
To cancel from an Attendant Console:
1. Press an idle LOOP key.
2. Dial the CALL FORWARDING - BUSY LINE cancellation code; receive Special Dial Tone.
3. Dial the originating station number; receive Service Set Tone.
SERVICE CONDITIONS
1. If a called station is in a Hunt Group and forwards calls to another Hunt Group, the calling party is
directed to the called party's Hunt Group.
2. This feature may be set and cancelled by either the station user or the Attendant.
3. CALL FORWARDING - BUSY LINE data remains in the data memory even if the system is reinitial-
ized or in the event of a power failure.
4. Stations are assigned this feature according to CLASS OF SERVICE programming in system data.
5. CALL FORWARDING - BUSY LINE can be provided on a system and/or an individual basis.
Page 70
Revision 1.0
CALL FORWARDING - BUSY LINE
ND-91285-001(E)
DECEMBER, 1999