Direct Inward Dialing - K-Ccis - NEC Univerge SV9100 Manual

Hide thumbs Also See for Univerge SV9100:

Table of Contents

This feature allows an incoming DID call (centralized DID) to be routed directly

across a K-CCIS link to reach a station in the remote system without Attendant

For more details, refer to the UNIVERGE SV9100 Features and Specifications

Terminal Type:

All Stations

Required Components:

Normal call handling procedures apply.

SV9100 Networking Manual

Call billing to the outside party starts when the incoming call connects to the

K-CCIS trunk.

When an incoming DID call from the CD-PRTA card with Caller ID information

is transferred to the station in K-CCIS network, the Caller ID Name and Number

follow across the K-CCIS network to the distant system.

This feature is supported when a Closed Numbering Plan or Open Numbering

The UNIVERGE SV9100 system supports DID Digit Conversion when using

station numbers with 2~8 digits.

An extension on a remote system can be the destination for the DID Received

Vacant Number Operation Assignment (Program 22-09-02).

Direct Inward Dialing – K-CCIS