NEC NEAX 2000 Programming Manual page 616

(2) CALLER ID Receiver Assignment
START
CM09
Provide the system with MFC Signaling.
CM05
Assign an AP number to the CIR (CALLER
ID Receiver) trunk.
The AP number must match the SENSE
switch setting on the CIR trunk.
Assign the trunk number to each circuit of
CM06
the CIR trunk.
CM08 Assign requesting CALLER ID signal from
network when an incoming call termi-
nates.
Assign the sending method of calling num-
CMAA
ber from the network, to the AP number
assigned by CM05.
CM31 Assign the number of digits of the calling
number sent from the network.
Assign the CALLER ID Receiver to each
AP number (0-3) of the CIR trunk.
AP number 0-3 correspond to the AP num-
ber (04-15) assigned by CM05.
END
DESCRIPTION
INITIAL
INITIAL
INITIAL
INITIAL
INITIAL
FEATURES FOR OTHER COUNTRIES ONLY
(1) 52: MFC Signaling
(2) 0 : To provide
Y=0
•
(1) 04-15: AP No.
(2) 08: CIR trunk (PN-4RSTC)
Y=04
•
(1) 00-15: Trunk No.
(2) XX Z
XX: AP No. assigned by CM05
Z : 0-3: Circuit No.
(1) 472: Request for ANI/CALLER ID sig-
nal
(2) 0: Available
Y=07
•
(1) 04-15: AP No.
(2) 0: CALLER ID (CLASS SM)
Y=1
•
(1) 3: Number of Digits from Network
(2) 01-31
NONE : No data
Y=2
•
(1) 0: AP No. 0=AP No. X
1: AP No. 1=AP No. Y
2: AP No. 2=AP No. Z
3: AP No. 3=AP No. W
X Y Z
< <
(2) 3 : All circuits are assigned as receiv-
er
– 596 –
CALLER ID CLASS
DATA
: 1 digits-31 digits
W
<
A2594-10