Room Cut-Off - NEC NEAX 2000 Programming Manual

ROOM CUT OFF
PROGRAMMING
To provide the Room Cut Off from a Front Desk Terminal or Hotel Console, or PMS, do the fol-
lowing programming:
START
CM08
Specify the type of call to be restricted by
Room Cut Off.
Specify whether Room Cut Off record is
printed out on Hotel Printer, and the report
is sent to PMS when setting or resetting
Room Cut Off.
Assign the destination of a call transferred
CM51
when the station in Room Cut Off condi-
tion dials outgoing access code.
Assign the Call Forwarding-Intercept
CM90
(ICPT) key, if the ATTCON/DESKCON is
assigned as destination by CM51 Y=11.
Assign the function keys required for
Room Cut Off on the Front Desk Terminal.
This data assignment is not re-
NOTE:
quired when Room Cut Off is set
by PMS.
Assign the function key required for Room
Cut Off on the ATTCON/DESKCON, if pro-
vided.
A
DESCRIPTION
(1) 232
(2) 0 : C.O. outgoing calls
1 : All outgoing calls
(1) 267
(2) 0 : Available
1 : Not available
Y=11
•
(1) 00-63: Tenant No.
(2) X-XXXX: Station No.
or
E000: Attendant Console
Y=00
•
(1) ATTCON No. (E000-E007) +
No.
(2) F6065: Call Forwarding-Intercept
Y=00
•
(1) My Line No. +
(2) F1065: Room Cut Off
F1074: Set
F1076: Reset
F1077: Release
Y=00
•
(1) ATTCON No. (E000-E007) +
No.
(2) F6100: Room Cut Off
F6104: Reset
– 688 –
ROOM CUT OFF
DATA
,
+ Key
,
+ Key No.
NOTE
,
+ Key
A2679-10