NEC NEAX 2000 Programming Manual page 854

(1/1)
CALL FORWARDING - BUSY LINE -D
GENERAL DESCRIPTION
This service feature permits a call to a busy station to be immediately forwarded to a predesignated sta-
tion, or to the Attendant.
STATION APPLICATION
term
All D s
OPERATING PROCEDURES
To set CALL FORWARDING - BUSY LINE:
1. Lift the handset or press Speaker key; receive Dial Tone.
2. Press the CALL FORWARDING - BUSY LINE key; receive Special Dial Tone.
3. Dial the desired target station number; receive Service Set Tone.
The LCD displays "SET xxxx" (where xxxx is Target Station)
The LED of the associated feature key lights.
4. Replace the handset or press Speaker key.
5. If the target station is the operator, the LCD displays "SET OPR" (OPR means Operator)
To cancel CALL FORWARDING - BUSY LINE:
1. Lift the handset or press Speaker key; receive Dial Tone.
2. Press the CALL FORWARDING - BUSY LINE key; receive Special Dial Tone.
3. Dial '*'; receive Service Set Tone. The LCD displays "CANCEL" and the associated LED goes
out.
4. Replace the handset or press Speaker key.
SERVICE CONDITIONS
1. Refer to CALL FORWARDING - BUSY LINE.
Page 72
Revision 1.0
ND-91285-001(E)
DECEMBER, 1999
term