NEC NEAX 2000 Programming Manual page 912

(2/2)
DAY/NIGHT MODE CHANGE BY STATION DIALLING (CONT'D)
SERVICE CONDITIONS (CONT'D)
5. Conditions by function key on D
a. This feature can be set from any multiple D
term
b. A single D can change a DAY/NIGHT mode for multiple tenants individually.
c. When depressing a function key once, the DAY/NIGHT mode for the tenant changes.
d. If using a function key, the associated LED will be lit when the tenant changes to NIGHT mode.
e. In case of power failure or the system is initialized, the DAY/NIGHT mode will be kept as before.
f. This feature is also available for a DSS CONSOLE.
g. When setting from a D
DAY/NIGHT MODE CHANGES
For
Incoming Trunk C.O.S.
Available Not Available
Not Available Available
Available Available
Page 130
Revision 1.0
term
:
term
with an LCD, the following is displayed:
DAY/NIGHT MODE STATUS
For
Incoming Trunk
DAY
NIGHT
—
—
DAY
NIGHT
DAY
NIGHT
ND-91285-001(E)
DECEMBER, 1999
term
in each tenant.
C.O.S.
—
—
DAY
NIGHT
DAY
NIGHT
T = DAY
NIGHT
T = DAY
DAY
term
DISPLAY ON D
DAY
NIGHT
DAY
NIGHT
DAY
NIGHT
S= NIGHT
S= NIGHT