Power Failure Transfer - NEC NEAX 2000 Programming Manual

POWER FAILURE TRANSFER

PROGRAMMING
To use the AUC card:
START
CM10 Assign the AUC card to the required LEN.
Assign the COT card to the required LEN.
END
To use the PFT card:
No programming is required.
HARDWARE REQUIRED
AUC card and COT card, or PFT card
DESCRIPTION
(1) 000-763: LEN
(2) X-XXXXXXXX: Station No.
(1) 000-763: LEN
(2) D000-D255: Trunk No.
– 386 –
POWER FAILURE TRANSFER
DATA
A2382-10