NEC NEAX 2000 Programming Manual page 381

To provide the Night Announcement by Digital Announcement Trunk for a DID call, do the follow-
ing programming in addition to the programming of "DIRECT INWARD DIALLING (DID)".
page 222
START
CM10
Assign the Digital Announcement Trunk
card number to the required LEN.
The Digital Announcement Trunk
NOTE:
card number must be assigned
to the first LEN (Level 0), the
third LEN (Level 2), the fifth LEN
(Level 4), and the seventh LEN
(Level 6) of each LT slot.
CM12 Assign the Service Restriction Class A for
Digital Announcement Trunk Access
(Record/Replay/Delete) to required sta-
tion.
CM15 Allow Digital Announcement Trunk Access
in the Service Restriction Class A as-
signed by CM12 Y=02.
CM30 Assign the Digital Announcement Trunk to
each incoming trunk.
CM35 Provide the received digit conversion to
the DID trunk routes assigned by CM30
Y=00.
A
DESCRIPTION
NIGHT CONNECTION-FLEXIBLE
(1) 000-763: LEN
(2) EB002-EB127:
Digital Announcement Trunk Card No.
For PIM0/1: EB002-EB031
For PIM2/3: EB032-EB063
For PIM4/5: EB064-EB095
For PIM6/7: EB096-EB127
NOTE:
Y=02
•
(1) X-XXXXXXXX: Station No.
(2) XX ZZ
XX: 00-15 : Service Restriction Class
Y=33
•
(1) 00-15: Service Restriction Class A as-
(2) 1 : Allow
Y=05
•
Direct-In Termination in Night Mode
(1) 000-255: Trunk No.
(2) EB000-EB001: Built-in DAT on MP card
EB002-EB127: Digital Announcement
Y=18
•
(1) 00-63: Trunk Route No.
(2) 0: To provide
– 361 –
NIGHT CONNECTION-FIXED
DATA
EB000 and EB001 are dedi-
cated to built-in Digital An-
nouncement Trunk of the MP
card.
A
signed by CM12 Y=02
Trunk Card No. as-
signed by CM10
A2356-10