Meet-Me Paging-Attendant; Meet-Me Paging-Station - NEC NEAX 2000 Programming Manual

MEET-ME PAGING-ATTENDANT

MEET-ME PAGING-STATION

PROGRAMMING
START
CM10
Assign the Paging Trunk (COT card and
DK card) to the required LEN.
The DK card number must be as-
NOTE:
signed to the first LEN (Level 0)
and third LEN (Level 2) of each
LT slot.
Assign the Service Restriction Class A for
CM12
Paging Access to the required stations.
Allow Paging Access in the Service Re-
CM15
striction Class A assigned by CM12 Y=02.
CM44 Assign the Paging function to the DK card
or external equipment interface on the MP
card.
A
DESCRIPTION
MEET-ME PAGING-ATTENDANT
(1) 000-763: LEN
(2) D000-D255: COT Card
E800-E831: DK Card
For PIM0/1 : E800-E807
For PIM2/3 : E808-E815
For PIM4/5 : E816-E823
For PIM6/7 : E824-E831
NOTE:
Y=02
•
(1) X-XXXXXXXX: My Line No.
(2) XX ZZ
XX: 00-15 : Service Restriction Class
Y=08
•
(1) 00-15: Service Restriction Class A as-
(2) 1 : Allow
(1) XX Y
XX : 00-31: DK Card No. assigned by
Y : 0-3: Circuit No. of DK card
313: MP built-in External Equipment In-
terface
(2) 02XX: Speaker Paging Start
XX: 00-09: Speaker Paging Zone 0-9
– 310 –
MEET-ME PAGING-STATION
DATA
Circuit No. 3 of E831 is used
for built-in External Equip-
ment Interface of the MP card
by setting CM44.
A
signed by CM12 Y=02
CM10 (E800-E831)
assigned by CM30 Y=28
A2298-10