VOICE GUIDE
PROGRAMMING
To provide the message which is sent when a station goes off hook while Message Waiting/Call
Forwarding-All Calls/Do Not Disturb service is set to the station:
START
Specify the multiple connections of the
CM08
Digital Announcement Trunk (DAT card)
on Announcement Service.
Assign a Digital Announcement Trunk card
CM10
number to the required LEN.
The Digital Announcement Trunk
NOTE:
card number must be assigned
to the first LEN (Level 0), the
third LEN (Level 2), the fifth LEN
(Level 4) and the seventh LEN
(Level 6) of each LT slot.
Assign the Service Restriction Class A for
CM12
Announcement Service to the required
stations.
CM15
Allow Announcement Service in the Ser-
vice Restriction Class A assigned by
CM12 Y=02.
A
DESCRIPTION
(1)
124
(2)
0 : Available
1 : Not available (Single connection)
(1)
000-763: LEN
(2)
EB002-EB127: Digital Announcement
For PIM0/1: EB002-EB031
For PIM2/3: EB032-EB063
For PIM4/5: EB064-EB095
For PIM6/7: EB096-EB127
NOTE:
Y=02
•
(1)
X-XXXXXXXX: Station No.
(2)
XX ZZ
XX: 00-15 : Service Restriction Class
Y=34 Group 0
•
Y=35 Group 1
•
Y=36 Group 2
•
Y=37 Group 3
•
Y=38 Group 4
•
Y=39 Recording for Announcement
•
Service (Group 0-4)
(1)
00-15: Service Restriction Class A as-
(2)
1 : Allow
– 570 –
VOICE GUIDE
DATA
Trunk Card No.
EB000 and EB001 are dedi-
cated to built-in Digital An-
nouncement Trunk of the MP
card.
A
signed by CM12 Y=02
A2566-10